巢湖低温高效聚磷菌的筛选及其特性

采用低温富集培养及混合平板分离技术,从巢湖底泥中分离筛选得到2株在低温下仍具有较高效能的菌株D3、D6,经过厌氧/好氧交替培养,2种菌株在低温下(8℃)的除磷率均达到80%以上。在低温下,研究了p H、微量元素对2株菌株生长及除磷率的影响,实验结果表明,2株菌都具有广泛的温度适应性,适宜其生长和除磷的p H为中性偏碱,微量元素的缺乏对2株菌株的生长和除磷效果有不同程度的不良影响。染色观察显示,厌氧培养时菌体内聚羟基丁酸(PHB)颗粒明显增多,转为好氧培养后异染颗粒增多,为典型的聚磷菌特征。经鉴定,2株菌均属假单胞菌属。     

苯并三唑在土壤中的吸附特性

为了解苯并三唑(BTA)在水-土系统中的迁移转化,通过批实验方法研究了BTA在华北平原土样(GSS13)中的吸附,考察了平衡时间、土壤投加量、溶液初始p H以及共存阳离子对吸附的影响。结果表明,在初始阶段,土壤对BTA的吸附速率较快,之后随着吸附点位的减少,吸附逐渐变慢;吸附过程符合准二级反应动力学方程。土壤对BTA的平衡吸附为非线性吸附,吸附等温线为Freundlich型;随着土壤投加量的增大,单位质量土壤吸附BTA的量减少,可能原因是所选土壤对BTA的吸附存在"固体浓度效应"。溶液的p H通过改变BTA的存在形式和土壤表面的带电性而影响吸附,当溶液p H在BTA的p Ka2(8.6)附近时,土壤对BTA的吸附效果最好。此外,溶液中共存阳离子对土壤吸附BTA有不同的影响,Na+对吸附影响不明显,而不同浓度Ca2+对BTA的吸附有不同程度的促进作用。     

苏州河市郊段底泥中COD_(Cr)和NH_3-N的空间分布特征

对苏州河截流区外河段(城郊段)东大盈河口—北新泾,按河道形态,支流与城镇分布等因素,沿程采集24个底泥柱样,测定其不同部位不同深度底泥中COD_(Cr)和NH_3-N含量,分析COD_(Cr)和NH_3-N在沿程和垂向上的分布特征及其成因。结果表明,底泥中污染沿程分布呈不规则波状起伏,东大盈河、蕴藻浜、盐铁塘、封浜、华漕港、新槎浦等支流口,浮泥层中COD_(Cr)含量达2万mg/kg,超过背景值2—3倍,支流口下游200m范围内均较高;黄渡小支流口、华漕港支流口浮泥层中NH_3-H含量达250mg/kg,超过背景值3倍。在垂向分布上,底泥柱样都出现峰值分布,在某些弯道及支流口出现递减分布。底泥耗氧污染程度主要与支流及其排污量有关,其次是弯道凸岸处污染物易于沉积富集。这为苏州河市郊段环境综合治理、底泥疏浚和处置提供了科学依据。     

Removal and pre-concentration of phenolic species onto beta-cyclodextrin modified poly(hydroxyethylmethacrylate-ethyleneglycoldimethacrylate) microbeads

Poly(Hydroxyethylmethacrylate-Ethyleneglycoldimethacrylate), poly(HEMA-EGDMA), microbeads with 150-200 microm in size, was prepared by suspension polymerization. Beta-cyclodextrin was modified onto the polymeric microbeads using glutaraldahyde activation in an acidic medium at pH=2.5. FT-IR and TGA were used for the characterization of modified polymers and the determination of the nature of the interaction between phenolic compounds and the modified polymeric microbeads. Plain and beta-cyclodextrin modified microbeads were used in adsorption-desorption studies of phenolic species in single solution. Adsorption capacities of the phenolic species onto the plain microbeads were found to be 28.2, 17.0, 14.3, 9.8, and 1.92 mg/g polymer for o-chloro phenol, p-nitro phenol, p-chloro phenol, o-nitro phenol, and phenol, respectively. However, for beta-cyclodextrin modified microbeads, adsorption capacity of phenolic species was determined as 274, 365, 128, 182, and 87 mg/g for phenol, o-nitro phenol, p-nitro phenol, o-chloro phenol, and p-chloro phenol, respectively. Desorption ratio for the phenolic species was more than 90%, except for o-nitro phenol. Detection limits of the phenolic species were improved at least 500-fold for UV-Vis spectrophotometric detection, after the pre-concentration of all phenolic species used in this study. Adsorption time for the phenolic species onto beta-cyclodextrin-modified poly(HEMA-EGDMA) microbeads was found to be reasonable short (10-60 min) and suitable for the applications. Also, synthesized microbeads were useful for the repeated use for the removal and pre-concentration of phenolic species.     

Gas- and particulate-phase specific tracer and toxic organic compounds in environmental tobacco smoke

Cigarette smoke constituents are worthy of concern and characterized as carcinogens. Different experiment conditions may affect the environmental tobacco smoke (ETS) constituents. A study was undertaken in a 75.5-m3 spare office to evaluate ETS constituents in a real environment. Thirty-four volatile organic compounds (VOCs) including three ETS tracers: nicotine, 2,5-dimethylfuran and 3-ethenylpyridine (3-EP), 19 carbonyl compounds, 54 semi-volatile compounds (24 polycyclic aromatic hydrocarbons (PAHs) and 30 alkanes) as well as CO and total particulate matter (TPM) from 15 leading commercial brands were determined. ETS constituents did not increase with increasing cigarette tar. ETS tracers nicotine and 3-EP were affected greatly due to more sorption and surface reactions in real world compared to other studies conducted in chamber, which resulted in 2-5 times lower. Benzene, toluene, ethylbenzene, xylenes, acrolein, 2-butanone and the high molecular weight compounds exhibited little affect. Pearson correlation analyses show that gas-phase and particulate-phase ETS tracers did not show significant correlation, but within each homologue many of compounds correlated significantly. Indole and cholesta-3,5-diene were also detected in ETS. These results may be useful in efforts to better understand the health effect of ETS exposure and source apportionment.     

Particulate matter pollution in Kunshan High-Tech zone: Source apportionment with trace elements, plume evolution and its monitoring

Particulate matter(PM) in the Kunshan High-Tech zone is studied during a three-month campaign. PM and trace elements are measured by the online pollution monitoring, forecastwarning and source term retrieval system AS3. Hourly measured concentrations of PM_(10), PM_(2.5) and 16 trace elements in the PM_(2.5) section(Ca, Pb, Cu, Cl, V, Cr, Fe, Ti, Mn, Ni, Zn, Ga, As, Se, Sr, Ba)are focused. Source apportionment of trace elements by Positive Matrix Factorization modeling indicates that there are five major sources, including dust, industrial processing, traffic,combustion, and sea salt with contribution rate of 23.68%, 21.66%, 14.30%, 22.03%, and 6.89%,respectively. Prediction of plume dispersion from concrete plant and traffic emissions shows that PM_(10) pollution of concrete plant is three orders of magnitude more than that of the traffic. The influence range can extend to more than 3 km in 1 hr. Because the footprint of the industrial plumes is constantly moving according to the local meteorological conditions, the fixed monitoring sites scattered in a few hundred meters haven't captured the heaviest pollution plume at the local scale of a few km~2. As a more intensive monitoring network is not operationally possible, the use of online modeling gives accurate and quantitative information of plume location, which increases the spatial pollution monitoring capacity and improves the understanding of measurement data. These results indicate that the development of the AS3 system, which combines monitoring equipment and air pollution modeling systems, is beneficial to the real-time pollution monitoring in the industrial zone.     

A green method to synthesize flowerlike Fe(OH)3 microspheres for enhanced adsorption performance toward organic and heavy metal pollutants

Dyestuffs and heavy metal ions in water are seriously harmful to the ecological environment and human health.Three-dimensional(3 D) flowerlike Fe(OH)_3 microspheres were synthesized through a green yet low-cost injection method,for the removal of organic dyes and heavy metal ions.The Fe(OH)_3 microspheres were characterized by thermal gravimetric analysis(TGA),Fourier transform infrared(FT-IR),and transmission electron microscopy(TEM) techniques.The adsorption kinetics of Congo Red(CR) on Fe(OH)_3 microspheres obeyed the pseudo-second-order model.Cr~(6+) and Pb~(2+) adsorption behaviors on Fe(OH)_3 microspheres followed the Langmuir isotherm model.The maximum adsorption capacities of the synthesized Fe(OH)_3 were 308,52.94,and 75.64 mg/g for CR,Cr~(6+),and Pb~(2+) respectively.The enhanced adsorption performance originated from its surface properties and large specific surface area of 250 m~2/g.The microspheres also have excellent adsorption stability and recyclability.Another merit of the Fe(OH)_3 material is that it also acts as a Fenton-like catalyst.These twin functionalities(both as adsorbent and Fenton-like catalyst) give the synthesized Fe(OH)_3 microspheres great potential in the field of water treatment.     

Electricity price subsidy or carbon-trading subsidy: which is more efficient to develop photovoltaic power generation from a government perspective?

Photovoltaic (PV) power generation has high investment costs and long payback periods. Therefore, during early deployment, subsidies are fundamental and necessary to accelerate its development. We consider the question of how to promote PV industry development and which supporting policy is more efficient in accelerating adoption. Based on real options method, we establish a subsidy efficiency model for electricity price subsidies and carbon-trading subsidies under two sources of uncertainty power demand for PV and the investment cost-reduction probability. This study aims to compare the two forms of subsidies from the perspective of promoting immediate investment and maximizing the subsidy policy efficiency for the government (minimizing the unit carbon-mitigation cost) and advance relevant policy proposals. An example of China is provided to test the effectiveness of the model and to illustrate the implications of the solutions. The results show that a carbon-trading subsidy is better than an electricity price subsidy and that it is essential to improve the demand for the power produced by the PV power-generation projects. Lower market risk and driving technology progress are both conducive to improving the subsidy efficiency. This study also provides a meaningful reference for governments worldwide to formulate subsidy programs to support PV power-generation projects.     

羧甲基壳聚糖及复合絮凝剂对染料废水的脱色研究

用羧甲基壳聚糖（CMCTS）复合聚合氯化铝（PAC）对分子量较小的活性染料模拟废水进行脱色处理,结果表明,引入PAC作为助凝剂的脱色效果优于单纯使用CMCTS。处理染料废水的最佳pH为5,CMCTS的投加量为90mg／L,PAC的投加量为2．5mg／L,此优化条件下,染料废水的脱色率可达93．4％,COD去除率达88．5％。     

Drivers and barriers to engage enterprises in environmental management initiatives in Suzhou Industrial Park, China

Small- and medium-sized enterprises (SMEs) play an important role in sustainable development not only for their significant contribution to China’s economy, but also for their large share of total discharged pollutants. Therefore, this research takes the enterprises in Suzhou Industrial Park, China as the case study to investigate the environmental management practices of SMEs, and identify drivers and barriers to engaging businesses in environmental management initiatives. It is shown that, as in other countries, SMEs are less active in adopting environmental management initiatives than larger companies. Legislation remains the key driver to engage SMEs in environmental management initiatives. Based on the analysis, policy recommendations are also presented.